Selection of pitch is also of considerable significance for precise and fast cutting. A careful selection guarantees long life with proper cutting performance. Incorrect selection of Blade TPI results in taper cutting, blade jamming, blade tooth blunting, blade cracking and damage etc.

All new blades possess very sharp teeth edges. This causes micro fractures at normal cutting rate due to excess vibrations. It is recommended that approximately 20 minutes of solid cutting or 300 sq. Cm. Of material should be cut at 40% of recommended feed at normal speed. Proper break-in, rounds-off sharper edges and ensures longer blade life.

Special Tooth Design for Sawing "Difficult to cut material."

PIVOT: This tooth design is available in large dimensions and course pitches. Leading tooth is grounded with added positive rake angle to give better penetration to cut SS, non-ferrous alloys and exotic alloys.

WEP: Highly positive tooth design with wider tooth setting provides extra advantage in cutting SS, high alloy and tool steel and heavy cross sections with stress.

WAW: This tooth design features marginally shaved off backing forming wave type design, that provides extremely efficient sawing performance while cutting SS and Titanium / Zirconium based alloys. it can also be combined with WEP design. M-51: M-51 edge with 10% Cobalt and 10% Tungsten offers very high resistance to the heat. This saw blade is immensely used for heavy duty cutting applications. Special tooth design can be applied to M-51 Grade saw blades.

Magnum Carbide
We manufacture and supply magnum carbide tipped bandsaw blades, which are mostly used for sawing different tough alloys like cobalt, nickel, zirconium and titanium based metal etc. These blades provide the alloys extremely good surface finish. Higher cutting rates can be achieved in cutting SS, High Alloy and Tool Steels.

Power hacksaw blades
ITL offers ace quality power hacksaw blades, which are available in a variety of dimensions. We develop these blades in full HSS and bimetal material, which offer them extraordinary durability.

We offer a range of high grade saw blades, which are useful for cutting host of materials like stainless steel, high alloy steel & tool steel etc. We have used best quality chrome to provide the backing material of these blades maximum durability. The teeth of these saw blades are made of alloyed HSS with 8% Cobalt & 10% Moly. (M-42, 68-69 HRC)

Special Tooth Design for Sawing "Difficult to cut material."

PIVOT: This tooth design is available in large dimensions and course pitches. Leading tooth is grounded with added positive rake angle to give better penetration to cut SS, non-ferrous alloys and exotic alloys.

WEP: Highly positive tooth design with wider tooth setting provides extra advantage in cutting SS, high alloy and tool steel and heavy cross sections with stress.

WAW: This tooth design features marginally shaved off backing forming wave type design, that provides extremely efficient sawing performance while cutting SS and Titanium / Zirconium based alloys. it can also be combined with WEP design. M-51: M-51 edge with 10% Cobalt and 10% Tungsten offers very high resistance to the heat. This saw blade is immensely used for heavy duty cutting applications. Special tooth design can be applied to M-51 Grade saw blades.

We present premium quality cost-effective blades, which feature positive and neutral rake angle tooth design useful for cutting different type of materials. M-42 edge provides these blades high heat resistance and enhances their working life. Backing material of these blades is specially developed and alloyed with chromium to provide excellent durability. These blades are well suitable for cutting all common steels. (M-42, 67-68 HRC).

We manufacture and supply magnum carbide tipped bandsaw blades, which are mostly used for sawing different tough alloys like cobalt, nickel, zirconium and titanium based metal etc. These blades provide the alloys extremely good surface finish. Higher cutting rates can be achieved in cutting SS, High Alloy and Tool Steels.

Apart from badshaw blades, we also offer a wide range of top class power hacksaw blades and circular sawing blades, which are essentially used for cutting the metal with excellent surface finish and within minimum time. We use latest technology and quality checked metal for manufacturing the blades of superior quality. We develop these blades in various dimensions to befit customers' demands.

ITL offers ace quality power hacksaw blades, which are available in a variety of dimensions. We develop these blades in full HSS and bimetal material, which offer them extraordinary durability.

We manufacture circular saw blades, which are used for cutting ferrous and non-ferrous metals very fast. These circular saw blades are available in different materials like full HSL, bimetal, carbide tipped circular saws etc.

Request a Quote

Keeping pace with ultra modern technology, ITL presents its exclusive collection of tube mills, which are available in a myriad of sizes to meet with the requirements of the clients. We precisely engineer these tube mills on the basis of technical-how provided by our German collaborators. We offer them in different version such as manual tube mills, automatic tube mills and many more.

Our tube mills possess flexibility, which provides them requisite feature for developing pipes and tubes in diverse sizes and gauges. The mill design and construction features of these tube mills are based on primary product mix. We specialize in manufacturing these tube mills in standard as well as customized form in terms of designs and compositions of various sub-assemblies. We offer them at cost effective prices.