ITL Industries Limited

"ITL" High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-525 F For Structural Steel & Pipe Cutting”
Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 60 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Hydraulically operated main vice with double acting full stroke cylinder. 
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Automatic blade guide setting with the opening and closing of moving vice to avoid accident due to negligence of the operator. Also, moving blade guide always remains very close to the bar.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided(Optional).
• Split vice:- Machine is designed to offer burr free cutting with the help of split vice were in raw material bar and cut piece are clamped rigidly till the cutting head goes up after cutting which also avoid rubbing of blade.
• Automatic return of cutting head much above the bar after cutting to safe height to save blade damage by bar while indexing.

"ITL" High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-660 F For Structural Steel & Pipe Cutting”

Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 75 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Hydraulically operated main vice with double acting full stroke cylinder. 
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Automatic blade guide setting with the opening and closing of moving vice to avoid accident due to negligence of the operator. Also, moving blade guide always remains very close to the bar.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided(Optional).
• Split vice:- Machine is designed to offer burr free cutting with the help of split vice were in raw material bar and cut piece are clamped rigidly till the cutting head goes up after cutting which also avoid rubbing of blade.
• Automatic return of cutting head much above the bar after cutting to safe height to save blade damage by bar while indexing.

"ITL" High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-860 F For Structural Steel & Pipe Cutting”

Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 100 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Hydraulically operated main vice with double acting full stroke cylinder. 
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Automatic blade guide setting with the opening and closing of moving vice to avoid accident due to negligence of the operator. Also, moving blade guide always remains very close to the bar.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided(Optional).
• Split vice:- Machine is designed to offer burr free cutting with the help of split vice were in raw material bar and cut piece are clamped rigidly till the cutting head goes up after cutting which also avoid rubbing of blade.
• Automatic return of cutting head much above the bar after cutting to safe height to save blade damage by bar while indexing.
• Machine is designed to feed material for cutting from either side as per the convenience of the operator.

"ITL" High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-1020 F For Structural Steel & Pipe Cutting”

Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 140 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Hydraulically operated main vice with double acting full stroke cylinder. 
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Automatic blade guide setting with the opening and closing of moving vice to avoid accident due to negligence of the operator. Also, moving blade guide always remains very close to the bar.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided(Optional).
• Split vice:- Machine is designed to offer burr free cutting with the help of split vice were in raw material bar and cut piece are clamped rigidly till the cutting head goes up after cutting which also avoid rubbing of blade.
• Automatic return of cutting head much above the bar after cutting to safe height to save blade damage by bar while indexing.
• Machine is designed to feed material for cutting from either side as per the convenience of the operator.

“ITL” High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-300 F For Structural Steel & Pipe Cutting”

Specifications :

• Cutting Capacity : Round Pipe/Structural Steel 260 mm dia. Rectangular 300 x 260 mm 
• Cutting Capacity : Solid Round 210 mm min. dia. 60 mm 
• Blade Speed : 20 To 100 Mtr/Min std. supply suitable for cutting all types of metals.

Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 60 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided.

“ITL” High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-450 F For Structural Steel & Pipe Cutting”


Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 70 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Hydraulically operated main vice with double acting full stroke cylinder. 
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided(Optional).
• Split vice:- Machine is designed to offer burr free cutting with the help of split vice were in raw material bar and cut piece are clamped rigidly till the cutting head goes up after cutting which also avoid rubbing of blade.

"ITL" High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-560 F For Structural Steel & Pipe Cutting”

Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 75 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Hydraulically operated main vice with double acting full stroke cylinder. 
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Automatic blade guide setting with the opening and closing of moving vice to avoid accident due to negligence of the operator. Also, moving blade guide always remains very close to the bar.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided(Optional).
• Split vice:- Machine is designed to offer burr free cutting with the help of split vice were in raw material bar and cut piece are clamped rigidly till the cutting head goes up after cutting which also avoid rubbing of blade.
• Automatic return of cutting head much above the bar after cutting to safe height to save blade damage by bar while indexing.

“ITL” High Speed Double Column with Linear Motion Guide (LMG) Semi Automatic Horizontal Bandsaw Machine Model “ITL-350 F For Structural Steel & Pipe Cutting”


Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting head up-down movement guided in Vertical pair of imported linear Motion bearing for jerk free movement.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Coolant tank with 60 Ltr. capacity and powered with electric coolant pump.
• Adjustable tungsten carbide face blade guides with ball bearings at either side of cutting bar.
• Automatic return of cutting head.
• Variable feed pressure to cut easy to difficult material as well as hollow sections and profile with increased productivity and tool life.
• High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade gullets to optimize productivity and tool life.
• Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the material property.
• Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool life, surface finish and minimize vibration during cutting.
• Heavy duty energy efficient electric motor.
• Control panel with necessary switch gear and step down transformer for control circuit.
• To optimize productivity and blade life, constant beam strength is obtained through a contentiously monitored stretching of blade through a hydraulically operated blade tension arrangement.
• Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
• Hydraulic power pack with sufficient oil tank capacity and necessary control elements are provided on the machine. Circular inspection door cover provided for easy checkup and cleaning of the oil Tank.
• Cutting feed and rapid reverse of cutting arm.
• Automatic machine stop when blade fails.
• Blade Tensioning when hydraulic power is on and tension release no sooner machine is off to minimize fatigue stresses.
• Auto stop of machine when blade breaks.
• Blade guards for operator safety near clamping area.
• All electric motors are of IP-54 protection grade.
• Kant angle of 3 degree shall be provided.

“ITL High Speed L.M. Guide Way Miter Cutting Band Sawing Machine Model “ITL-440 LMGSWM”

Specifications :

• Cutting Capacity-At 90 degree : Round 450 mm dia (Min. 100 mm dia)
• Cutting Capacity- 90 degree : 440 x 440 mm
• Cutting Capacity- 75 degree : 425 X 440 mm
• Cutting Capacity-60 degree : 400 X 440 mm
• Cutting Capacity-45 degree : 300 X 440 mm
• Cutting Capacity-30 degree : (One Side) 160 X 440
• Blade Speed : 20 TO 100 Mtr/Min std. Supply suitable for cutting all types metals.

Construction Details :

• Fully heavy duty welded structure torsion free construction.
• Cutting arm Guided in Leaner Motion Guide Bearing.
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
• Auto height stop on return stroke of cutting arm.
• Tungsten Carbide face guides with ball bearings.
• Separate cabinet of Control panel with all necessary switch gears, fuses, indicators & push buttons & mounted on machine.
• Hydraulic main vice.
• Machine is provided with worm reduction gear box for blade wheel rotation.
• Cutting feed and rapid reverse of cutting arm.
• Blade Tensioning when hydraulic power is on and tension releases no sooner machine is off to minimise fatigue stresses.
• All electric motors are of IP-54 protection grade.
• Supply : 415 V, 50 Hz,3 Phase A.C. Supply Control circuit with 24Volt DC

Special Features:

• Anti Friction LMG bearing for smooth up-down movement of cutting head (blade).
• Hydraulic Automatic feed regulation to adjust feed without operator involvement depending upon material composition, hardness and cross - section. Much superior and better technology than conventional hydro-mechanical blade sensor.
• Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings which does not require frequent alignment.
• Sturdy Split Main Vice helps in holding the job on both sides of cutting
• Hydraulic Blade Tension for precise tensioning of blade for cutting. The blade tension is gradually released when power off to avoid falling of blade.
• Heavy Duty Gearbox with Taper Roller Bearings to take the side thrust load of blade tension easily. The drive output is very smooth which helps in getting very high blade life.
• High pressure coolant jets are provided for chips removal at very high cutting rates. Better cooling and chips removal helps is achieving high tool life and exceptional material removal rate (MRR).
• Ergonomic design of Electrical control panel and Hydraulic Power pack for ease of operation and maintenance.

ITL has designed and manufactured the most affordable Double Column Horizontal Band Saw Machine with Linear Motion Guide Bearings for smoothest operation. The Machine can be used for Job Shop, tool rooms as well as for light/medium production requirements.

Features:

• Highly compact and space-saving design especially suitable for small entrepreneurs.
• Very easy to use and maintain, does not require skilled operators. Highly ergonomic design & features.
• Miter (Angular) Cutting upto 45 degree one direction only. (Optional)
• Direct Drive by motor coupled to the Gear Box to eliminate power losses.
• Infinitely Variable Speed Drive (VFD) for achieving infinitely variable cutting speed with larger tool life.
• Highly smooth and positive transmissions by advanced Gear Box.
• Precision Flow Control Valve to enhance the blade life.
• Hydraulic feed sensor to regulate the excessive feed automatically.
• Double acting Hydraulic Cylinder. (for up down movement)
• HSS Bi-metalic Blade as well as Tungsten Carbide lip (TCT) can be used on the machine.
• Coolant Pump with a Built-in Tank for compact construction.
• Smaller Hydraulic tank for oil saving and lower maintenance.
• Bundle cutting arrangement (Optional)
• Length Setting Stopper (Optional) 

Special Features:

• Anti Friction LMG bearings for smooth movements of cutting head
• Hydraulic Automatic feed regulation* to adjust feed without operator involvement depending upon material composition, hardness and cross - section
• Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings with does not require frequent alignment as blade verticality is maintained while manufacturing of the machine.
• Floating shuttle vice mounted on four Heavy duty linear bearing block for self alignment depending upon work piece straightness or surface roughness. Bar stock slides on main vice without any resistance as shuttle vice adjusts automatically
• Wider shuttle vice helps proper gripping of bar stock while indexing.
• High pressure coolant jets are provided for high cutting rates. A compact and beautifully designed steel enclosure is provided to prevent coolant splashing and spillage, thus saving the wastage of cutting oil.
• Blade cost much lower as compared to other make of similar capacity machines.

Construction Detail:

• Fully heavy duty steel welded structure - torsion free construction
• Cutting head guided in to vertical high precision clearance free Motion Guide Bearing 
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder
• Auto height stop on return stroke of cutting head
• Moving blade guides Rigd construction, leads screw operated with hand wheel, parallel to blade line.
• Built in coolant tank powered with High Flow Coolant Motor.
• ungsten Carbide face guides with ball bearings.
• Hydraulic operated rotating cleaning wire brush.
• Hydraulically operated main vice & shuttle vice.
• Automatic machine stop if blade breaks.
• Seperate hydraulic tank.

Special Features:

• Wheel covers inter-locking with saw motor.
• Blade broken indicator.
• Vice clamping before saw start.
• Bar exhaust sensor for bar ending signals for accident protection.
• Automatic height adjusting accordingly to the job size.
• Safety guard provided for shuttle table moving area.
• Protection limit switch provided for up down movement of cutting head.
• Mechanical overload protection for both servo motor (specially designed mechanical coupling).
• Energy chain protection for moving hoses and cables. 
• Cutting feed through Servo Motor with ball screw, guided on imported Linear Motion Guides. 
• Highest productivity and exceptional blade life  achievable in comparison to conventional band saw machines. 
• Self-adjusting Floating Shuttle system with broad and sturdy construction. 
• Multiple cut length programming with batch selection facility. 
• PLC gives recommendation for feed and speed selection based on the job material (Type & Size) 
• User-friendly HMI with touch screen facility provides comprehensive information like -a. Cutting rate (Sq. cm/min) b. Cutting area (Sq. cm) c. Actual feed rate (mm/sec.) d. Cutting time (in seconds). e. No. of cuts completed f. Current in saw motor (Amp) g. Torque in feed motor (Nm also in %) h. Torque in servo motor (Nm also in%) i. Indexing length (mm) etc. 
• Rapid approach feature inbuilt in the PLC program to increase productivity. 
• New Advanced Heavy duty Blade guide arrangement with horizontal and vertical adjustment facility for perfect blade alignment. 
• Metallic telescopic bellows for protection of Bail screw from dirt and metal chips.

Machine for special purpose applications:

• For tool room cutting including Relief Angle on Stamping Dies.
• Destructive Testing of Radial Tyre for Cords Spacing.
• Die Cast Runner and Riser Cutting.
• Destructive Testing of Automobile Engine Block.
• Rail Slitting for points & cross and Expansion Joints. 
• Silica Slab Cutting for Solar Chips.
• Graphite Block Cutting.
• Aluminum Cast Slab Ends cutting online.
• Scraper Notch cutting for Sugar Industry.
• Circle cutting machines for ferrous, non-ferrous and non metals. 

Special Features: 

• Anti Friction LMG bearings for smooth up-down movements of cutting head (blade). 
• Hydro Mechanical Sensor to adjust feed without operator involvement depending upon material composition, hardness and cross section. Much superior and better technology than conventional hydro-mechanical blade sensor. 
• Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings which does not require frequent alignment. 
• Sturdy Split Main Vice helps in holding the job on both sides of cutting.
• Hydraulic Blade Tension for precise tensioning of blade for cutting. The blade tension is gradually released when power off to avoid falling of blade. 
• Heavy Duty Gearbox with Taper Roller Bearings to take the side thrust load of blade tension easily. The drive output is very smooth which helps in getting very high blade life.  
• High pressure coolant jets are provided for chips removal at very high cutting rates. Better cooling and chips removal helps is achieving high tool life and exceptional material removal rate (MRR). 
• Ergonomic design of Electrical control panel and Hydraulic Power pack for ease of operation and maintenance. 
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder. 
• Auto height stop on return stroke of cutting arm. 
• Automatically adjustable heavy duty carbide blade guides no need of manual frequent adjustments as the blade guides adjust automatically as per the job width. 
• Hydraulically operated rotating cleaning wire brush. 
• Hydraulically operated main vice. 
• Cutting feed and rapid reverse of cutting arm. When the Hydraulic power of the machine is off, the tension on the blade is released, so as to avoid fatigue stresses. 
• Automatic machine stops when blade fails. 
• Hydraulic feed regulation for high productivity and enhanced tool life. 

Special Features: 

• Anti Friction LMG bearings for smooth up-down movements of cutting head (blade). 
• Hydro Mechanical Sensor to adjust feed without operator involvement depending upon material composition, hardness and cross section. Much superior and better technology than conventional hydro-mechanical blade sensor. 
• Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings which does not require frequent alignment. 
• Sturdy Split Main Vice helps in holding the job on both sides of cutting.
• Hydraulic Blade Tension for precise tensioning of blade for cutting. The blade tension is gradually released when power off to avoid falling of blade. 
• Heavy Duty Gearbox with Taper Roller Bearings to take the side thrust load of blade tension easily. The drive output is very smooth which helps in getting very high blade life.  
• High pressure coolant jets are provided for chips removal at very high cutting rates. Better cooling and chips removal helps is achieving high tool life and exceptional material removal rate (MRR). 
• Ergonomic design of Electrical control panel and Hydraulic Power pack for ease of operation and maintenance. 
• Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder. 
• Auto height stop on return stroke of cutting arm. 
• Automatically adjustable heavy duty carbide blade guides no need of manual frequent adjustments as the blade guides adjust automatically as per the job width. 
• Hydraulically operated rotating cleaning wire brush. 
• Hydraulically operated main vice. 
• Cutting feed and rapid reverse of cutting arm. When the Hydraulic power of the machine is off, the tension on the blade is released, so as to avoid fatigue stresses. 
• Automatic machine stops when blade fails. 
• Hydraulic feed regulation for high productivity and enhanced tool life. 

Special Features:

• Anti Friction LMG bearings for smooth up-down movements of cutting head (blade).
• Hydraulic Automatic feed regulation to adjust feed without operator involvement depending upon material composition, hardness and cross - section. Much superior and better technology than conventional hydro-mechanical blade sensor.
• Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings which does not require frequent alignment.
• Sturdy Split Main Vice helps in holding the job on both sides of cutting
• Hydraulic Blade Tension for precise tensioning of blade for cutting. The blade tension is gradually released when power off to avoid falling of blade.
• Heavy Duty Gearbox with Taper Roller Bearings to take the side thrust load of blade tension easily. The drive output is very smooth which helps in getting very high blade life.
• High pressure coolant jets are provided for chips removal at very high cutting rates. Better cooling and chips removal helps is achieving high tool life and exceptional material removal rate (MRR).
• Ergonomic design of Electrical control panel and Hydraulic Power pack for ease of operation and maintenance.

Machine for special purpose applications:

• For tool room cutting including Relief Angle on Stamping Dies.
• Destructive Testing of Radial Tyre for Cards Spacing.
• Die Cast Runner and Riser Cutting.
• Destructive Testing of Automobile Engine Block.
• Rail Slitting for points & cross and Expansion Joints. 
• Silica Slab Cutting for Solar Chips.
• Graphite Block Cutting.
• Aluminum Cast Slab Ends cutting online.
• Scraper Notch cutting for Sugar Industry.
• Circle cutting machines for ferrous, non-ferrous and non metals.

Special Features:

• Anti Friction LMG bearings for smooth up-down movements of cutting head (blade).
• Hydraulic Automatic feed regulation to adjust feed without operator involvement depending upon material composition, hardness and cross - section. Much superior and better technology than conventional hydro-mechanical blade sensor.
• Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings which does not require frequent alignment.
• Sturdy Split Main Vice helps in holding the job on both sides of cutting
• Hydraulic Blade Tension for precise tensioning of blade for cutting. The blade tension is gradually released when power off to avoid falling of blade.
• Heavy Duty Gearbox with Taper Roller Bearings to take the side thrust load of blade tension easily. The drive output is very smooth which helps in getting very high blade life.
• High pressure coolant jets are provided for chips removal at very high cutting rates. Better cooling and chips removal helps is achieving high tool life and exceptional material removal rate (MRR).
• Ergonomic design of Electrical control panel and Hydraulic Power pack for ease of operation and maintenance.