Itl Industries Limited

ITL BI-METAL BAND SAW BLADE GRADES & THEIR APPLICATIONS

ITL BAND SAW BLADE GRADES "M-42"

• A very good solution for cutting general steels and easy to cut materials. Made of M-42 tool steel with 8% Cobalt content which gives it high wear resistance. It has special gullet design for free flow of chips which helps in achieving smooth cutting and long tool life.
• This blade performs very well even on light duty machines like Scissor Type/Tilting Machines (with manual tension system), Old Bandsaw Machines with poor cutting conditions.
• Economical Solution with High Performance.
• Advance Uniform Micro Structure - Top Cutting Accuracy
• Constant Hardness and Toughness Value- Reduced Machine Load
• Micro- Resistance, Stable Cutting Edge- Greatly Extended Blade Life
• High Capability of Heat and Wear Resistance- More Performance & Efficiency WORK.

• PIECES: Round Bar / Square Bar / Flat Bar / Bundle Multiple Layers / Angles and Profiles
• This is the most versatile blade for wide applications like General steels, Forging Materials, Bundle Cutting, medium alloys, non-ferrous metals etc. Amazing tool life and superb cutting economics make it the most desirable blade in the industry.
• Fastest selling blade of the entire product range. Exceptional performance.
It has 10 degrees positive rake angle which helps in deeper penetration into the job and faster material removal rate (MRR).
It has a strong backing material and the cutting tip material has 9-10% Cobalt and can cut material upto Tensile Strength of 1300 N/sq.mm.
For pipe cutting/structural steel cutting application, special tooth profiles are available in M-42 grade blade.
• For best results, use on ITL's Double column/LMG type bandsaw machine.


ITL BAND SAW BLADE "ENDURA M-51"

• This blade is specially made for difficult to cut materials like Stainless Steels, Die Steels, OHNS, High Carbon Steels, Heat Resistant Steels and High Alloy Steels.
It has 10% Cobalt and Tungsten content which helps cut material upto Tensile Strength 1600 N/sq. mm. It has very special tooth profile which generates least amount of heat while cutting tough materials thus giving it very high tool life.
• For best results, use on ITL's Double column/LMG type bandsaw machines.


ITL BAND SAW BLADE "SUPERIA M-71"

• This blade's cutting tips are made with powder metallurgy technology having tool steel grade M-71. This blade is also available with special wear resistant TiAIN coating which gives it exceptional heat & wear resistant properties.
It is best suited for cutting Super Alloys, Work Hardening Steels, Tool Steels and materials which are very tough to cut like Baked Graphite, Inconel, Monel etc.
• This offers a very good balance between a HSS Bi-Metal Bandsaw Blade and a Carbide Tipped Bandsaw Blade. This provides good economics for cutting tough materials as this blade is not as expensive as Carbide Tipped ones.
• For best results, use on ITL's Double column/LMG type bandsaw machine.

ITL Circular Saw Cutters.

Indore Saws And Tools produces widest range of Carbide and Cermet Tip Coated and Non Coated Circular Saw Cutters with all sizes and grades which are being manufactured at Japan as per Indore Saws And Tools specification for Indian as well as Global Market. Indore Saws And Tools offers variety of Cutters to fulfill requirements to cut all most all the material for different applications of all types of industry.
These cutter are produced with special brazing technology leads to a higher braze joint strength & therefor teeth are firmly attached to the plate.
Cutters are well tested to cut clean with high dimensional accuracy / optimum life / best finish which reduces per cost.

ITL Offers Variety Of TCT Cutters.

ITL FEV - Highly abrasion resistant cermet tips leads to higher tool life. - Suitable for Ferrous Material.

ITL FESV - New improved abrasion resistant cermet tips to get higher blade life. - Suitable for Medium Alloys, with extra Brazing Strength.

ITL FERV - New cermet tips with improved grade / profile for best result. - Suitable for Forging Material.

ITL FESRV - Unique combination of grade / profile of cermet. - Suitable for all types of Ferrous & Forging Material Length.

ITL FEPV - These cutters are with special quality of cermet to resist high adge chipping & high abrasion due to cutting chips inside the tubes & pipe. - Suitable for Small Section & Pipe Cutting.

ITL FE SPV - Special grade tungsten carbide with high grade coating on tips & cutting area to reduce heavy abrasion during cutting tough material. - Suitable for Alloy & High Carbon.

ITL FE SPRV - Special coated carbide tips to withstand high abrasion during cutting alloy & high carbon. - Suitable for Alloy & High Carbon Hot Forging.

ITL SUSMAXV - Specially designed carbide tips with special coating makes this cutter most efficient & effective for cutting stainless steel. - Suitable for Stainless Steel

ITL BI-METAL BAND SAW BLADE GRADES & THEIR APPLICATIONS

ITL BAND SAW BLADE "ENDURA M-51"

• This blade is specially made for difficult to cut materials like Stainless Steels, Die Steels, OHNS, High Carbon Steels, Heat Resistant Steels and High Alloy Steels.
It has 10% Cobalt and Tungsten content which helps cut material upto Tensile Strength 1600 N/sq. mm. It has very special tooth profile which generates least amount of heat while cutting tough materials thus giving it very high tool life.
• For best results, use on ITL's Double column/LMG type bandsaw machines.

ITL BI-METAL BAND SAW BLADE GRADES & THEIR APPLICATIONS

ITL BAND SAW BLADE GRADES "M-42"

• A very good solution for cutting general steels and easy to cut materials. Made of M-42 tool steel with 8% Cobalt content which gives it high wear resistance. It has special gullet design for free flow of chips which helps in achieving smooth cutting and long tool life.
• This blade performs very well even on light duty machines like Scissor Type/Tilting Machines (with manual tension system), Old Bandsaw Machines with poor cutting conditions.
• Economical Solution with High Performance.
• Advance Uniform Micro Structure - Top Cutting Accuracy
• Constant Hardness and Toughness Value- Reduced Machine Load
• Micro- Resistance, Stable Cutting Edge- Greatly Extended Blade Life
• High Capability of Heat and Wear Resistance- More Performance & Efficiency WORK.

• PIECES: Round Bar / Square Bar / Flat Bar / Bundle Multiple Layers / Angles and Profiles
• This is the most versatile blade for wide applications like General steels, Forging Materials, Bundle Cutting, medium alloys, non-ferrous metals etc. Amazing tool life and superb cutting economics make it the most desirable blade in the industry.
• Fastest selling blade of the entire product range. Exceptional performance.
It has 10 degrees positive rake angle which helps in deeper penetration into the job and faster material removal rate (MRR).
It has a strong backing material and the cutting tip material has 9-10% Cobalt and can cut material upto Tensile Strength of 1300 N/sq.mm.
For pipe cutting/structural steel cutting application, special tooth profiles are available in M-42 grade blade.
• For best results, use on ITL's Double column/LMG type bandsaw machine.

ITL Circular Saw Cutters.

Indore Saws And Tools produces widest range of Carbide and Cermet Tip Coated and Non Coated Circular Saw Cutters with all sizes and grades which are being manufactured at Japan as per Indore Saws And Tools specification for Indian as well as Global Market. Indore Saws And Tools offers variety of Cutters to fulfill requirements to cut all most all the material for different applications of all types of industry.
These cutter are produced with special brazing technology leads to a higher braze joint strength & therefor teeth are firmly attached to the plate.
Cutters are well tested to cut clean with high dimensional accuracy / optimum life / best finish which reduces per cost.

ITL Offers Variety Of TCT Cutters.

ITL FEV - Highly abrasion resistant cermet tips leads to higher tool life. - Suitable for Ferrous Material.

ITL FESV - New improved abrasion resistant cermet tips to get higher blade life. - Suitable for Medium Alloys, with extra Brazing Strength.

ITL FERV - New cermet tips with improved grade / profile for best result. - Suitable for Forging Material.

ITL FESRV - Unique combination of grade / profile of cermet. - Suitable for all types of Ferrous & Forging Material Length.

ITL FEPV - These cutters are with special quality of cermet to resist high adge chipping & high abrasion due to cutting chips inside the tubes & pipe. - Suitable for Small Section & Pipe Cutting.

ITL FE SPV - Special grade tungsten carbide with high grade coating on tips & cutting area to reduce heavy abrasion during cutting tough material. - Suitable for Alloy & High Carbon.

ITL FE SPRV - Special coated carbide tips to withstand high abrasion during cutting alloy & high carbon. - Suitable for Alloy & High Carbon Hot Forging.

ITL SUSMAXV - Specially designed carbide tips with special coating makes this cutter most efficient & effective for cutting stainless steel. - Suitable for Stainless Steel