Circular Saw Cutter

Product Price :Get Latest Price

These COCs are available in three models for tube size upto 76mm, 90mm and 120mm OD and suitable sections covered in these ranges.

The no. of cuts one can have is 8 cuts per minutes of 6 meters for tube size 25.4mm in 1.5 mm thickness.

ECO-Friendly- Worlds’ first energy efficient Fly Cut Off, using less than 50 % power.

Fastest retrofitting- Existing mills can be equipped with this Burr Free Cold Cut Fly Cut Off just in 2 days. Only supply wire to connect. The machine has independent PLC Panel and control panel.

Easy to operate— Program has been designed in such a way that any very few information to be fed in HMI Screen.

Test Sample— Tube/ Pipe test sample can be obtained automatically at a definite interval of the desired length or can be cut any time when the mill is running.

Higher yield- In case if a defective portion is observed, cutting can be delayed to avoid defective portion of the cut length.

Length accuracy- Tolerance of +/- 2 mm can be obtained at moderate mill speed, means material saving on each cut.

Pay Back Period- Payback period can be considered around 12 months considering- Increase in mill productivity, Saving on end finishing operations, Quick dispatches- fast turnover and low inventory of finished product, Better price from the market, Saving on excess length.

Cutter used- Machine can adopt HSS and Carbide Tipped saws without any difficulty within 3 to 5 min. Coated HSS saw blade can be used for cutting mild steel Tubes/pipes up to 4.5 mm thickness. Also saw blade can be resharpened several times to use up to 275 mm diameter from 400 mm.

Per cut cost- Highly cost-effective cutting. Pipe of 25 mm diameter with 1.6 mm thickness can be cut at just Rs. 0.25 to Rs 0.45. Cutter can be resharpened up to 20 times.

Clean Burr Free cuts- well-finished end cuts do not require facing operation.

Additional Information:

• Item Code: FCS-90

Product Price :Get Latest Price

Product Price :Get Latest Price

Product Price :Get Latest Price

Product Price :Get Latest Price

These COCs are available in three models for tube size upto 76mm, 90mm and 120mm OD and suitable sections covered in these ranges.

The no. of cuts one can have is 8 cuts per minutes of 6 meters for tube size 25.4mm in 1.5 mm thickness.

ECO-Friendly- Worlds’ first energy efficient Fly Cut Off, using less than 50 % power.

Fastest retrofitting- Existing mills can be equipped with this Burr Free Cold Cut Fly Cut Off just in 2 days. Only supply wire to connect. The machine has independent PLC Panel and control panel.

Easy to operate— Program has been designed in such a way that any very few information to be fed in HMI Screen.

Test Sample— Tube/ Pipe test sample can be obtained automatically at definite interval of the desired length or can be cut any time when the mill is running.

Higher yield- In case if a defective portion is observed, cutting can be delayed to avoid the defective portion of the cut length.

Length accuracy- Tolerance of +/- 7 mm can be obtained at moderate mill speed, means material saving on each cut.

Pay Back Period- Payback period can be considered around 12 months considering- Increase in mill productivity, Saving on end finishing operations, Quick dispatches- fast turnover and low inventory of finished product, Better price from the market, Saving on excess length.

Cutter used- Machine can adopt HSS and Carbide Tipped saws without any difficulty within 3 to 5 min. Coated HSS saw blade can be used for cutting mild steel Tubes/pipes up to 3.5 mm thickness. Also saw blade can be resharpened several times to use up to 275 mm diameter from 400 mm.

Per cut cost- Highly cost-effective cutting. Pipe of 25 mm diameter with 1.6 mm thickness can be cut at just Rs. 0.25 to Rs 0.45. Cutter can be resharpened up to 20 times.

Clean Burr Free cuts- well-finished end cuts do not require facing operation.

Additional Information:

• Item Code: FCS-50-75